hello,
i’m using a LTE Stick over USB.
Whatpulse only counts the traffic over ethernet, but there is no internet connection.
The internet comes from USB.
Whatpulse recognizes that there is an internet connection and my IP adress, but my “HUAWEI Mobile Connect - Modem” is not listed in the network tab of Whatpulse.
I have installed WinPcap together with Whatpulse 2.0
Is there a way to let Whatpulse recognize my USB LTE Stick and to let it count the right traffic?
This is a difficult one to answer for me. I would say that, based on what I’ve read here on the forums, only a wire-based connection is being counted. Most, if not all, connections are enabled and recognizable by the client, as you have stated. However, I would wait for a more clear response from the admins on this.
There are some interfaces filtered out (like bluetooth, pseudo ports, etc). To get an idea of it is actually doing that in your case, could you run http://whatpulse.org/etc/windows-get-nics.exe (put it in the same folder and the whatpulse.exe) and post or email me a screenshot of both windows (all info readable) ?
i cannot start this program, because there is no mingwm10.dll on my computer
Put windows-get-nicks into WhatPulse’s directory.
[quote=“Triela, post:5, topic:10755”]
Put windows-get-nicks into WhatPulse’s directory.
[/quote]i put it in c:/program files/whatpulse and when i start it, i get the system error message, that i don’t have mingwm10.dll
Install http://www.microsoft.com/en-us/download/details.aspx?id=5555 as expected for most Windows machines.
Ah, sorry then. It was there in the betas of 2.0 and I switched to Linux so I didn’t checked it until now. Download it from there (Download zip-file, and this site can be trusted in my opinion.) and extract it into the WhatPulse directory.
[quote=“MAX3400, post:7, topic:10755”]
Install http://www.microsoft.com/en-us/download/details.aspx?id=5555 as expected for most Windows machines.
[/quote]i needed the x64 version … i had it already installed, so i let it repair the installation …
now i get the message, that i don’t have libgcc_s_dw2-1.dll 
where can i find the “install-all-available-DLLs-Patch”? :-/
There. I think it’s the last dll needed.
And this procedure happens because that file is created during the betas, and it’s not upgraded since then, I think.
ok, it seems i have all DLLs now, but now i get following message:
“Der Prozedureinsprungpunkt “_Z5qFreePv” wurde in der DLL “QtCore4.dll” nicht gefunden.”
Translation:
“The procedure “_Z5qFreePv” in the dynamic library “QtCore4.dll” not found.”
So it’s different too in the betas… Okay, I’ve uploaded the DLLs from the beta (but I don’t know where to upload them, it’s too large for the forums), download and extract them into a new directory and copy windows-get-nics.exe there. It should work after that. I hope at least. 
i just saw, that there is a Fix for recognizing USB adapters …
does it include my LTE-Stick?
where can i get that update?
[quote=“smitmartijn, post:15, topic:10755”]
Hi,
Please try 2.0.1a: http://whatpulse.org/forums/showthread.php?tid=2172
[/quote]thx, but still no LTE Stick shown in my WP 2.0.1a and no traffic for my internet is counted, only für the ethernet card 
If you insert it after booting the client, restart the ‘npf’ service. (net stop npf, net start npf)
i opened cmd as Admin and wanted to stop npf, but it said that it could not could be stopped…
i tried reboot, too, but still only the ethernet card
i also downloaded the latest version of WP
just downloaded the latest Version (2.3.1) of WP and still only the Ethernet Card is shown…
Internet and IP is recognized correct
